threadinsertsdirect.com
UK manufactured inserts & turned parts
threaded Inserts for Plastics, wood and composite materials.
Email; davartfasteners@hotmail.com
Phone; 01386 833784
MULTIBARB INSERT.
M3-M4-M5-M6-M8-M10 Brass Barbed Insert can be installed into all thermoplastics by heat/ ultrasonic
or press-in insertion, to give a higher resistance to pull out loads. The barbed form design
makes it possible to manufacture different lenghts of body headed or without a head.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121.
Fasteners are supplied self colour in 1000 or bulk quantities.
Common part numbers; 001-002+ thread size
ADVANTAGES OF THIS INSERT ARE;
DIFFERENT INSTALLATION METHODS, A RAPIDLY INSTALLED LOW COST FASTENER,
DIFFERENT LENTHS MANUFACTURED.
GRIPLOK INSERT.
M3-M4-M5-M6 Brass press-in expansion inserts which, due to their diamond knurl pattern,
give minimum penetration of the sides of the hole without sacrificing pull-out resistance.
This makes them ideally suitable for applications into hard thermosetting plastics.
Headed and reverse headed inserts manufactured.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121.
Fasteners are supplied self colour in a 1000 or bulk quantities.
Common part numbers; N41-N42-N42R+ thread size
ADVANTAGES OF THIS INSERT ARE;
EASY PRESS-IN INSERTION, SELF-LOCKING ACTION ON MATTING SCREW,
GOOD IF VIBRATION PRESENT, DIFFERENT LENGHTS MANUFACTURED.
MULTIBARB HEADED INSERT.
M3-M4-M5-M6-M8-M10 Brass barbed headed inserts can be installed into thermoplastics by
heat/ ultrasonic or a press-in insertion, to give a higher resistance to pull out loads.
The unique barbed form design gives excellent resistence to torsion and pull-out.
Manufactured in long and short versions with different head diameters and thickness of head to suit your moulding.UK Manufactured with bar rod to BSEN12164 CW614N CZ121.
Fasteners are supplied self colour in small or bulk quantities.
Common part numbers; 071-073-003-004-005-006+ thread size
ADVANTAGES OF THIS INSERT ARE;
SUITABLE FOR ULTRASONIC, HEATED AND COLD PRESS-IN INSTALLATION INTO MOST GRADES
OF PLASTIC. IDEAL FOR PUSH-IN & PULL THROUGH APPLICATIONS WHERE THE HEAD MAY
ACT AS A SPACER, DIFFERENT LENGHTS MANUFACTURED.
SLOT SCREW-IN INSERT.
M3-M3.5-M4-M5-M6-M8 Brass slot screw-in inserts suitable for installation into thermoplastic
and thermosetting plastic materials. They are extremely suitable for applications which require high pull-out resistance in materials with a low core strength.
Headed and stud versions manufactured.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121.
Fasteners are supplied self colour in a 1000 or bulk quantities.
Common part numbers; SCT-HSCT-SCTS+ thread size
ADVANTAGES OF THIS INSERT ARE;
HIGH PULL-OUT RESISTANCE,CAN CARRY HIGH LOADS IN WEAK PLASTICS.
HEADED AND STUD VERSIONS MANUFACTURED.
MOULD-IN INSERT
M2.5-M3-M4-M5-M6 Brass blind ended threaded insert preferred for mould-in applications, very close to the edge of mouldings, or in situations of thin walls or bosses. It has an external diamond knurl pattern and can be produced with extra undercuts to improve on pullout performance. A through hole insert can be manufactured where a through hole in a moulding is acceptable.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121.
Fasteners are supplied self colour in a 1000 or bulk quantities.
Common part numbers; 016-116-017-117+ thread size
ADVANTAGES OF THIS INSERT ARE;
BLIND ENDED-PREVENTS INGRESS OF PLASTIC, SQUARE FACE FITS FLUSH WITH MOULD TOOL. HIGH LEVEL OF PERFORMANCE.
HELIX-PUSHIN INSERT
M3-M4-M5-M6 Brass through hole push in threaded insert with a
symmetrical one direction helix knurl.
A low cost quick to install insert, cold or heat installation.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121.
Fasteners are supplied self colour in a 1000 or bulk quantities.
ADVANTAGES OF THIS INSERT ARE;
LOW COST,QUICK TO INSTALL, THROUGH HOLE CAN BE
INSERTED FROM EITHER END.
ULTRASONIC INSERT
M3-M4-M5-M6-M8 Brass opposed helical knurl bands designed for quick installation into
thermoplastics using heat or ultrasonics.
The two bands of knurl provide a high torque and pull out resistance.
Headed and stud versions manufactured.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121
Fasteners are supplied self colour in a 1000 or bulk quantities.
Common part numbers; SL-SHK-SLTS-SLHS+ thread size
ADVANTAGES OF THIS INSERT ARE;
DIFFERENT LENGHTS AVAILABLE, PILOT ALLOWS SELF ALIGNING IN MOULDING.
TRISTAR SCREW-IN INSERT
M3-M4-M5-M6-M8-M10 Brass double ended self tapping insert for use in thermoplastics.
An external truncated thread form with three cutting flutes over the lenght of the insert, which
improves the cutting load more than other forms of self tapping inserts.
Different lenghts manufactured per internal thread.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121
Fasteners are supplied self colour in a 1000 or bulk quantities.
Common part numbers; 145-136-137+ thread size
ADVANTAGES OF THIS INSERT ARE;
A LEAD ON BOTH ENDS FOR EITHER END INSTALLATION, NO SWARF CONTAMINATION
OF INTERNAL THREAD, EFFECTIVE CUTTING.
TRISTAR HEADED SCREW-IN INSERT
M3-M4-M5-M6-M8 Brass Headed self tapping insert for self tapping installation
into thermoplastics and thermoset plastics using a reversing driving mechanism.
For cold installation and light loading applications in wood and chipboard.
Reduced head sizes Manufactured.
UK Manufactured with bar rod to BSEN12164 CW614N CZ121
Fasteners are supplied self colour in a 1000 or bulk quantities.
Common part numbers are; 237-336+ thread size
Davart Fasteners has been producing Fasteners and turned parts for over 25 years. Our machines are quick to produce
low cost thread inserts in Brass, Steel and stainless steel.
The maximum capacity of our machines are 32mm Diameter in bar. We specialise in threads, thread rolling, cross drilling ETC.
Male and female thread forms in metric and imperial.
We can offer any plating finish; Zinc, Nickel or black finish.
We can offer a quotation for Non-standard special
fasteners to customer drawings.
All components are boxed and sent UPS delivery.
Contact us; davartfasteners@hotmail.com
Davart Fasteners
Unit 10
Honeybourne airfield ind est
Weston road
Honeybourne
Evesham
Worcs.
WR11 7QF.
